Pros: isn't obtained from a power utility and doesn't require installation by electrician; easy setup; tracks current and long-term consumption patterns online via Microsoft Hohm
Cons: Wi-Fi adapter, while due for an update, is currently based on the antiquated 802.11b standard, which may have problems connecting to some g/n routers; Hohm charts currently reflect estimated rather than actual energy rates
The first step to reducing your consumption of something is to know exactly how much you're using and how you're using it. If you want to reduce your cable TV or mobile phone costs, for example, you need only check your monthly bill to see what channels your get or how many minutes you're using, and with that information, make an informed decision about how best to cut back.
But when it comes to your electric bill, all it will tell you is that you used a big pile of something called kilowatt hours and how much each one costs; you're left in the dark (pardon the pun) as to how much you used on a given day or time, and there's no indication as to how the relative power consumption of your various household appliances and devices contributed to the overall amount you were charged. Trying to curtail your usage and shrink your bill under those circumstances is at best an exercise in guesswork.
But with a PowerCost Monitor Wi-Fi Edition from Blue Line Innovations, you can replace speculation about your usage with cold, hard data. It continuously monitors your power consumption to show you how much you're using at any given moment--and more to the point, what it's costing you. Better yet, it uploads your usage data to the Microsoft Hohm energy Web site, where you can track it over extended periods of time.
While a handful of forward-thinking power utilities give customers the ability to monitor usage via smart meters and other specialized equipment, the $249 PowerCost Monitor Wi-Fi Edition is one of the few power-consumption meters that you don't need to obtain from your power provider and that doesn't require a installation by an electrician. In fact, getting the PowerCost Monitor up and running doesn't require any tools or special skills aside from a screwdriver and the ability read an electric bill.
The PowerCost Monitor Wi-Fi Edition consists of three separate components:
The PowerCost Monitor's sensor unit is compatible with a wide variety--albeit not all-- power meters. (See Blue Line Innovations' site for more details on power meter compatibility.) The battery-operated sensor operates passively -- it clamps onto a power meter and uses LEDs to read its spinning disc or optical port. Attaching the sensor isn't difficult, but it takes some effort to align it properly and make sure it stays that way as you tighten the clamp, as this tends to shift the sensor slightly. The sensor's 2 AA batteries, which are included, can be changed without removing the device, and Blue Line tells us they're good for between 8 and 12 months of life.
After physically installing the sensor, the display unit must be configured with information from your meter and electric bill in order to accurately calculate your power consumption and the charges accrued. The PowerCost Monitor can do the math no matter how you pay for powerm be it a flat rate, a tiered rate (one rate up to a certain consumption threshold and a higher rates for additional levels of consumption), or via a time-based scheme (where you pay more or less for power depending on the time of day).
Once the sensor is installed and display unit is configured, a sequence of button presses on each gets the two devices synched up, and within a minute or so the display unit starts spitting out numbers. All told, setting up the first two pieces of the PowerCost Monitor -- from reading the instructions to physical installation to information gathering and entering it into the display unit--took all of about twenty minutes.
Knowledge is Power
Once the display unit is up and running, you'll begin to see your household's power consumption in a new way. The display unit reports your current and cumulative power consumption in both kilowatts (kW)and dollars/cents per hour (a button press toggles between the two readings), and while the information isn't quite delivered in real time, it's pretty close -- figures are updated approximately every 30 seconds. As you watch the current consumption figure ebb and flow -- and the cumulative figure creeping ever northward -- you can't help but find yourself being more judicious in the use of power to keep both numbers as low as possible.
Because the PowerCost Monitor doesn't tie directly into your electrical lines, the only way to gauge the consumption of a particular appliance is via extrapolation. A button on the display unit will let you temporarily reset the current consumption figure to zero before you turn a given appliance on, much like you would set a food scale to subtract the weight of a plate or bowl. It's not a foolproof method of isolating an appliance's consumption, given that the number can be skewed if another appliance or device comes on while you're taking the reading, but in most cases it will give you a reasonably accurate answer when you want to know how much it costs to fire up the dishwasher, big-screen TV, air conditioner, etc. Blue Line says that smart plugs, which can precisely measure the consumption of a specific device (at least those that use a wall outlet), will eventually be available as PowerCost Monitor add-ons.
The last -- and arguably most useful -- component of the PowerCost Monitor Wi-Fi Edition is its eponymous Wi-Fi module. The small circular device is about the size of a bagel (complete with a hole in the center) and has a mounting point should you care to hang it on the wall. Like the display unit, it communicates directly with the sensor via low-frequency (433.92 MHz) wireless but also uses your Wi-Fi and Internet connection to relay consumption information to Hohm.
Configuration of the Wi-Fi module is handled via a downloadable utility which walks you through connecting the unit to both the sensor and your Wi-Fi network, and then associating it with a Hohm account. (Not surprisingly, linking to Hohm requires a Windows Live account.)